Home

Cifs vfs: cifs_mount failed w/return code = 13

Samba Client cifs › Wiki › ubuntuusers

CIFS VFS: cifs_mount failed w/return code = -512. Mit Linux-Kerneln ab 4.13 ist SMB3 der Standard, vorher SMB1. Können ältere Shares nicht geöffnet werden (z.B. von Windows XP), hilft es, beim Mounten mit cifs vers=1.0 als Option anzugeben oder für Windows 7 vers=2.1. mount error(13): Permission denied¶ Die Fehlermeldun PERMISSION DENIED (Photo by Hidde van Esch on Unsplash) If you recently updated your RedHat or CentOS 7.6 system, you may suddenly start getting Permission Denied errors when attempting to mount SMB shares via CIFS kernel: CIFS VFS: cifs_mount failed w/return code = -13. Deshalb habe ich die Option vers=1.0 benutzt. Kommentieren; Mehr . Antwort melden; godlie (Level 2) - Jetzt verbinden. LÖSUNG 02.04.2019, aktualisiert um 15:07 Uhr. Gut dann bleibt noch das sec argument, welches du anhand der man page mal durchprobieren, oder einfach mal ganz weglassen kannst. Denn der Status Logon Failure will uns.

[ 91.981960] CIFS VFS: cifs_mount failed w/return code = -113. Unable to find suitable address. I also tried to connect from one of my f24 machines to the other, and I get (on both machines, trying to connect to each other): Unable to find suitable address. But, if I try to connect using the same command from within the same target machine, it works without any issues, and it gets mounted. CIFS VFS: cifs_mount failed w/return code = -22 I am able to mount the same share on another centos system. I can ping the server, mount point directory has been created. mount samba cifs. share | improve this question | follow | edited Jul 16 '12 at 15:17. mrk. 4,854 3 3 gold badges 23 23 silver badges 41 41 bronze badges. asked Jul 18 '11 at 14:22. Adi Pandit Adi Pandit. 639 1 1 gold badge 6. Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg) dmesg | grep cifs [ 937.787720] FS-Cache: Netfs 'cifs' registered for caching [ 937.789474] Key type cifs.spnego registered [ 937.789477] Key type cifs.idmap registered [ 8656.242922] CIFS VFS: cifs_mount failed w/return code = -2 I trie

my system is openSUSE 12.1 in out of ISO installation with rear-1.13.-13.noarch.rpm installed. regards, bernd. Copy link Contributor dagwieers commented Aug 31, 2012. Is it possible to try the same with the latest snapshot release ? You can use the OpenSUSE RPM packages for this too from the Snapshot repository. It is likely going to fail in the same way, but I'd like to be sure as the. $ sudo mount /media/smb/ mount: //10...10/share/ is not a valid block device $ dmesg | tail CIFS VFS: cifs_mount failed w/return code = -6 mount samba cifs — user46935 fonte Risposte: 1 . Devi aggiungere cifs-utilsper poter montare le condivisioni CIFS: Relativi a Red Hat / CentOS:.

[root@server mnt]# uname -r 2.6.32-573.8.1.el6.x86_64 [root@server mnt]# uname -a Linux server 2.6.32-573.8.1.el6.x86_64 #1 SMP Tue Nov 10 18:01:38 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux [root@wservermnt]# more /etc/redhat-release CentOS release 6.7 (Final) [root@server mnt]# smbstatus Samba version 3.6.23-35.el6_8 PID Username Group Machine ----- Service pid machine Connected at ----- No. CIFS VFS: cifs_mount failed return code -13 0xc000006d NT_STATUS_LOGON_FAILUR 2018-06-24T23:58:32+03:00 DiskStation kernel: [ 297.288444] CIFS VFS: cifs_mount failed w/return code = -112 sonst ging immer alles, heute festgestellt das die remote-verbindung nicht mehr geklappt hat, und auch nicht mehr vorhanden war, wollte sie neu erstellen. geht leider nicht. unter windows keine Probleme. habe auch schon den movies ordner gelöscht, dann kommt der exist fehler nicht mehr.

On the affected VM # cat /proc/fs/cifs/Stats Resources in use CIFS Session: 0 Share (unique mount targets): 0 SMB Request/Response Buffer: 0 Pool size: 4 SMB Small Req/Resp Buffer: 0 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 64 maximum at one time: 2 On working VM: # cat /proc/fs/cifs/Stats Resources in use CIFS Session: 1 Share (unique mount targets. Apr 5 13:17:12 raspberrypi kernel: [ 16.448706] CIFS VFS: cifs_mount failed w/return code = -112 Wenn ich es richtig verstanden habe, dann hat sich der Default Wert von V1.0 auf V2.1 geändert. Könnt ihr das bestätigen mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Messages logs has this error: CIFS VFS: cifs_mount failed w/return code = -112. The same above command works in rhel7 and centos7. Any clue on how to make this work [78165.567002] CIFS VFS: protocol revalidation - security settings mismatch [78165.578589] CIFS VFS: session ffff96dc072fe400 has no tcon available for a dfs referral request [78165.588988] CIFS VFS: cifs_mount failed w/return code = -

[root@client1 ~]# mount -t cifs 130.x.y.z/vol1 /testamar -o sec=NTLMV2,username=user1 -vvvv The status code returned from storage is: NT_STATUS_LOGON_FAILURE Kernel logs Nov 21 15:09:29 ***** kernel: CIFS VFS: cifs_mount failed w/return code = -113 Nov 21 15:09:29 ***** mount: Unable to find suitable address. Nov 21 15:09:29 ***** systemd: backup-oracle.mount mount process exited, code=exited status=32 Nov 21 15:09:29 ***** systemd: Failed to mount /backup/oracle. Nov 21 15:09:29 ***** systemd: Dependency failed for Remote File Systems. Nov 21 15:09:29.

mount.cifs error 13 after update (CentOS/RedHat Linux 7.6 ..

Hi I'm trying to mount a smb share on a linux nas at the Address: 192.168.1.183 / ODROIDXU4-SHARE Path: Myfiles-Share I have made a file .smbcredentials under the user rene and chmod 600 on i Problem comes in 2 parts: guest VM and host On guest VM - error: CIFS VFS: cifs_mount failed w/return code = -13 On host: see below: (see also screenshot at end of issue) Rob@W8THINKPAD ~/work/proj.. 然而使用 cifs 挂载失败,老是提示没有权限,我反复在 Windows 系统下测试,用户密码千真万确,然而在 ubuntu 上就是无法成功挂载。 最后终于找到问题的根本原因,密码 hash 格式不对,这样系统一直回报密码错误: [602334.718574] CIFS VFS: cifs_mount failed w/return code = -13 Register. If you are a new customer, register now for access to product evaluations and purchasing capabilities. Need access to an account? If your company has an existing Red Hat account, your organization administrator can grant you access CIFS VFS: CIFS mount error: iocharset utf8 not found Let me slightly update the information for Ubuntu 16.04. When the package below is not installed only NLS for ISO_8859-1 is present. ls /lib/modules/$(uname -r)/kernel/fs/nls/ after installation of the extra kernel modules by. sudo apt install linux-modules-extra-$(uname -r) also the UTF-8 is.

CIFS VFS: Connecting to DFS root not implemented yet CIFS VFS: cifs_mount failed w/return code = -22. Any ideas what else I could try or what this could be? linux share mount cifs superblock. share | improve this question | follow | edited Apr 14 '14 at 2:33. Moshe Katz. 12.4k 7 7 gold badges 54 54 silver badges 97 97 bronze badges. asked Jan 28 '14 at 9:27. user3242272 user3242272. 23 1 1. # mount -v /mnt/xdrive mount.cifs kernel mount options: ip=172.30.1.99,unc=\\UOSFSTORE\SHARED,sec=ntlm,noperm,uid=1000,gid=1000,user=cm1nds,prefixpath=XDRIVE,pass=***** mount error(95): Operation not supported Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) # dmesg | tail -n1 [257463.335188] CIFS VFS: cifs_mount failed w/return code = -9 エラー発生例「Permission denied」、ログに「CIFS VFS: cifs_mount failed w/return code = -13」 ケルベロス認証の場合; 使用中のフォルダを操作しようとしている. エラー発生例「デバイスもしくはリソースがビジー状態です。」「target is busy Jan 30 10:59:49 debian-live kernel: [60576.124815] CIFS VFS: cifs_mount failed w/return code = -512 Jan 30 11:05:53 debian-live mountd[2719]: Caught signal 15, un-registering and exiting. Jan 30 11:05:53 debian-live kernel: [60940.321561] nfsd: last server has exite Same results with FC6 using mount -t cifs or mount.cifs Comment 2 Steve French 2006-11-25 22:04:28 UTC Is the server configured for share level security

Linux CentOS fstab cifs mount failed return code 95

[ 2290.150000] CIFS VFS: cifs_mount failed w/return code = -2 [ 2298.970000] CIFS VFS: could not allocate crypto hmacsha256 [ 2298.970000] [ 2298.980000] CIFS VFS: could not setup hash structures rc -2 [ 2298.990000] CIFS VFS: cifs_mount failed w/return code = -2. comment:4 Changed 5 years ago by John Thomas <openwrt-devel-2012@> sorry, did not see the prior closing and noting of duplicate. cifs mount sendet abwechselnd falsches passwd kurze Version: Die NETAPP-Protokolle zeigen an, dass die Anmeldung von unserem Client (debian 8.7, cifs=2:6.4-1 ) aus fehlschlägt .everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{. Nov 9 00:37:27 sparkyxfce kernel: [ 13.055283] CIFS VFS: cifs_mount failed w/return code = -112 Nov 9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32 Nov 9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'. Nov 9 00:37:27 sparkyxfce systemd[1]: Failed to mount /media/fritzbox. Nov 9 00:37:27 sparkyxfce systemd.

The moment I rebooted to Kernel 4.13.0-31, AND the released today 4.13.0-32, the CIFS shares to my networked NAS server failed. Investigation has proven that previous Kernels default to CIFS 1.0 and my NAS Server is only capable of CIFS 1.0. Adding the TAG vers=1.0 to FSTAB as altair4 kindly offers does indeed instruct the Kernel to use CIFS 1.0 - however all is NOT well mount.cifs fails to access MS Windows share when smbclient goes on fine, using the same credentials ( with samba service running ). The credfile have the following structure

SAMBA/CIFS connection error - Unix & Linux Stack Exchang

  1. But if I try to map a share in my Ubuntu server, it gives me logon failure. This is what it says in the console when adding using mount.cifs or mount -t cifs: mount error(13): Permission denied This is what is in the syslog: kernel: [204866.829700] Status code returned 0xc000006d NT_STATUS_LOGON_FAILUR
  2. Aborting operation. [ 3.061537] CIFS VFS: cifs_mount failed w/return code = -101. Die Credentials in der Credentials Datei sind ok. Hat jemand eine Idee, wie die Credentials und die SMBv2 Version in der /etc/fstab verwendet werden können ? Grüße Andrea
  3. CIFS VFS SessSetup = -13 cifs_mount failed in Xen (or Unix) Posted by Carlos Villabrille on December 3, 2018. Posted in: OS Categories, XEN. Tagged: CIFS, CTX132665, LinuxExtensionsEnabled, modprobe, ntlmssp, NT_STATUS_LOGON_FAILURE, SecurityFlags, SessSetup, XEN. Leave a Comment. While trying to mount a CIFs share folder you receive the following error: mount error(13): Permission denied.
  4. [795408.848372] CIFS VFS: cifs_mount failed w/return code = -2 [795429.985660] CIFS VFS: BAD_NETWORK_NAME: \\domaindfs.com\fs [795429.987223] CIFS VFS: cifs_mount failed w/return code = -2 [795442.437632] CIFS VFS: BAD_NETWORK_NAME: \\domaindfs.com\fs vers=1.0 turned off on windows by security reasons. Other versions do not works with DFS share. Steps To Reproduce: 3.10.-693.21.1.el7.x86_64.
  5. I'd like to see a way within CZ to specify NTLM security - I understand from the web searches that I did that CZ's default security is NTLM3, but ICBW - it's beyond my understanding. Alternatively an automatic fallback perhaps, i.e. if the default fails then try NTLM
  6. Samba Status Code Returned 0xc000006d NT_STATUS_LOGON_FAILURE SessSetup = -13 Home » CentOS » Samba Status Code Returned 0xc000006d NT_STATUS_LOGON_FAILURE SessSetup = -13 April 14, 2020 Ralf Prengel CentOS 5 Comment

[ 36.272963] CIFS VFS: cifs_mount failed w/return code = -13 Ich habe natürlich fstab kontrolliert sowie die credentials Datei und auch den einhängepunkt. Hatte auch noch ein paar Backups dieser Dateien, wo es unter Mint funktioniert hat, aber auch da kein Erfolg Oct 12 16:20:01 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -13. 二、没有分享目录 . Retrying with upper case share name mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) 对应 /var/log/messages 记录. Oct 12 16:20:06 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6 Oct 12 16:20:17 localhost kernel. 然而使用 cifs 掛載失敗,老是提示沒有權限,我反復在 Windows 系統下測試,用戶密碼千真萬確,然而在 ubuntu 上就是無法成功掛載。 最后終於找到問題的根本原因,密碼 hash 格式不對,這樣系統一直回報密碼錯誤: [602334.718574] CIFS VFS: cifs_mount failed w/return code = -13 Fedora 13 컴퓨터에 삼바 공유가 있습니다. 문제는 내 시스템에서 공유를 마운트하려고하면 매번 실패한 다른 모든 Windows 및 Linux 시스템에 문제가 없다는 것입니다. 다음 명령을 사용하여 공유를 마운트했습니다. mount -t cifs //192.168.1.200/myconfig / tmp / -o 게스

Aborting operation Feb 9 14:08:29 ldap kernel: [143452.140492] CIFS VFS: cifs_mount failed w/return code = -115. Socket error, we know what this is right? IP or port. Ping for domain/IP or Telnet to test port: bash code. ping IP telnet IP 445. Telnet was timing out, port closed for IP in firewall. READ How To Change The Default Programs Using Ubuntu. SOLUTION 3: LEM mount error(115): Operation. (perdonate la paranoia per aver nascosto gli indirizzi esatti ) Quanto sopra ha funzionato fino a Raring 13.04. Sono recentemente passato a Saucy 13.10 e misteriosamente ottengo un errore di montaggio. dmesg hallo ich mounte ein windows-share, das bis jetzt auch immer funktioniert hat. seit ein paar tagen erhalte ich folgende meldungen in den logs: Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12959 Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12960 Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12961 Jul 22 13:09:01 cknux kernel. I'm trying to mount a CIFS share, which is working on two Manjaro installation, but on the other two not. This is what I've done: Create a .smbpasswd file and chmod 600 Create /mnt/share folder Add the following line

mount - What does cifs_mount failed w/return code = -22

[SOLVED] unable to mount cifs file syste

Jun 17 15:48:21 rador3 kernel: CIFS VFS: cifs_mount failed w/return code = -13 Jun 17 15:48:21 rador3 sshd[11408]: pam_mount(mount.c:109) mount: ne peut monter périphérique de type bloc//192.168.1.12/user1 en lecture seulement Jun 17 15:48:21 rador3 sshd[11408]: pam_mount(mount.c:949) waiting for mount Jun 17 15:48:21 rador3 sshd[11408]: pam_mount(pam_mount.c:544) mount of user1 failed Jun. Hi,I installed Remote Mount plugin, added and SMB share, it appears in /media/xxxxxxxxxxx folder and works fine. I'm using Raspberry pi2.The problem is these log lines that started when I configured the remote share.(Code, 3 lines)Any hints >> CIFS VFS: No response for cmd 114 mid 1 >> CIFS VFS: cifs_mount failed w/return code = -112 >> > > Your client sent an SMB_COM_NEGOTIATE request and the server never > responded. > >> I have not found any errors logged in Windows 7 but perhaps I don't know where to look. >> I can access the Windows 7 share with no problems using smbclient on Linux. >> Any ideas will be very much appreciated. Oracle Cloud Infrastructure - Version N/A and later: Unable To Mount Windows 2016 Share On Linux Instanc

Might have a fix for you: The MD4 crypto kernel module is not compiled and packaged although it should. Not even if properly selected in make kernel_menuconfig Posted 7/14/15 9:00 AM, 13 message CIFS VFS: Unexpected SMB signature Status code returned 0xc0000016 NT_STATUS_MORE_PROCESSING_REQUIRED Mounting other shares with Kerberos (Windows shares for instance) does work. Any help is appreciated. Nicolas

mount.cifs error: CIFS VFS: could not allocate crypto ..

ntlmv2 経由で cifs を使用してボリュームを unix クライアントにマウントすると、エラーコード -13 で失敗します 最後の更新 PDFとして保 CIFS VFS: cifs_mount failed w/return code = -127 Thus, I don't know where the key is located, how it was created, nor what I should do to renew it or ignore it. Click to expand... Try the --verbose switch. Code: mount -t cifs //server/share /mnt/foo --verbose -o user=username . Verify that you have not disabled password authentication via the FreeNAS GUI for the user guest. Also check to see. All of a sudden a CIFS mount point stopped working. Probably after a kernel update, according to sources. Syslog got this: $ grep cifs /var/log/syslog Dec 28 09:56:12 hostname kernel: [141586.846065] CIFS VFS: cifs_mount failed w/return code = -5. Not really helpful, could be few different things. Turns out Samba now defaults to version 3 of protocol but the old server I connect to doesn't.

montaggio samba non riuscito con CIFS VFS: cifs_mount non

Sep 1 16:43:25 clientname CIFS VFS: cifs_mount failed w/return code = -13 # mount -t smbfs //servername/sharename /mnt/temp -o password= Anonymous successful ; I can then read and write files in /mnt/temp over smbfs but I cannot even mount it using cifs, but there are other cifs filesystems from other samba servers that mounted fine on this machine. I have the same problem mounting. issue kernel 4.13 was a troll I set a new user on windows server to allow mount shared folders I used administrator account but it doesnt works with mount.cifs command only Nemo can succeed then I create a new user with admin rights and it works with mount.cifs. Now it works I thought that it worked in this way: for example, GTK add the support for Wayland and then all programs made with GTK that were compiled from now will automatically have full support for Wayland with no need of the programmers to change the code of these programs

CIFS mount error on windows server share - CentO

CIFS VFS: cifs_mount failed return code -13 0xc000006d NT

Video: CIFS Remote Ordner Das deutsche Synology Support Foru

1556947 - ACCESS DENIED - CIFS VFS: Send error in

Hello AIX gurus, I am trying to mount a CIFS share on AIX and I could use some help. Here are the environment details: AIX - 6100-05-01-1016 Domain Controller - WIN2K8R2 (authentication takes place here) CIFS share is stored on a NetApp storage array that is joined to the domain I have.. 準備ができていないときのエラー [[email protected] ~]# mount -t smbfs //192.168..6/share /mnt/nas mount: unknown filesystem type 'smbfs'[[email protected] ~]# mount -t smbfs //192.168..6/share /mnt/nas mount: unknown filesystem type 'smbfs' CIFS VFS: cifs_mount failed w/return code = -2 CIFS VFS: cifs_mount failed w/return code = -6; Hat einer ne Idee, was falsch gelaufen ist ?! Ich bin der festen überzeugung, wenn ich den Server (NAS) neustarte, gehts wieder - aber wahrscheinlich nur einmal. Liebe Grüße. Marcel . frosch2. Inventar. Beiträge 4.803 Vorname Lutz NAS 1 TS-439 II Pro NAS 2 Eigenbau mit debian 10, zfs-Dateisystem BS Windows 10. 17. Juni 2010 #2; Hi, ich. kernel: [2137684.547185] CIFS VFS: cifs_mount failed w/return code = -13. Share this post. Link to post. x. Mark this reply as best answer, if it answered your question. Learn more . x. Upvote if you found this answer helpful or interesting. Learn more. 0; krugera | 15 0; krugera | Enthusiast | 15 | Members | 78 posts. Flag; Posted September 11, 2017. Sorry to bump this old thread but somehow. Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(22): Invalid argument 在Nautilus中,共享可见,但没有挂载,当我单击某个共享时,得到以下消息: mount: only root can mount //192.168.1.71/photos on /media/photo

Fehlermeldung beim mounten von SMB NAS: mount error(112

HelloI cannot get to the gui of my OMV install it says this instead:(Code, 7 lines)On the connected screen of the OMV it saysCIFS VFS: cifs_mount failed w/return code. kernel: CIFS VFS: cifs_mount failed w/return code = -22 私にとっての解決策は、cifsの古いバージョンを指定することでした(デフォルトでは3.0): /etc/fstab

centos6 - mount.cifs: mount error(112): Host is down ..

ich versuche seit Tagen verzweifel, per samba bzw cifs Freigaben auf unserem Win 2003 Server DOmaincontroller zu mounten. Dabei komme ich immer wieder zur gleichen stellen: Dabei komme ich immer wieder zur gleichen stellen Moin! Seit gestern habe ich meinen Qnap NAS gegen einen Server mit Openmediavault ersetzt. Um z.B. die Mülltermine auf dem Server zu haben und nicht per ssh auf den Edomi Rechner zu müssen, habe ich ein Verzeichnis per Samba auf den Edomi Rechner gemounted. Das geht nun leider nicht mehr... Ob über fstab oder übe [237179.795551] fs/cifs/cifsfs.c: Devname: //132.239.27.172/common flags: 0 [237179.795563] fs/cifs/connect.c: Username: lauria [237179.795565] fs/cifs/connect.c: file mode: 0x1ed dir mode: 0x1ed [237179.795600] fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 44 with uid: 0 [237179.795600] fs/cifs/connect.c: UNC: \\132.239.27.172\common [237179.795605] fs/cifs/connect.c: Socket created. Even as root I cannot access subfolders. > > Also when I do this I get: > > > [ 1256.850000] CIFS VFS: Autodisabling the use of server inode numbers > on \\146.232.129.137\dept. This server doesn't seem to support them > properly. Hardlinks will not be recognized on this mount. Consider > mounting with the noserverino option to silence this message. > > To me it seems like a bug somewhere.

196599 - [4.13] CIFS mount error -112, non-descriptive ..

Univention Bugzilla - Bug 31328. cifs mount fails from /etc/fstab. Last modified: 2013-05-13 15:19:43 CES When I schedule the job > in > cron however, the backup always fails because the mount never occurs. If > I > manually mount and then run the backup job in root it is successful. For > various reasons I don't want to leave the mounts permanent. > > OS Data you might need: > OS: Debian 3.1 r0 > Kernel: 2.6.11.12 w/ CIFS support compiled in > Mount Type: Samba CIFS > > I do not seem to have a.

Subscribe to this blog. mount cifs problems on ubuntu 18.04. up vote 0 down vote favorit Cannot mount win server 2016 share using cifs module + smb vers=3.1.1. Hi all, I would like to capture a network trace of the dup extents fsctl to debug/test the samba implementation I'm working on... Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) I get the same thing when attempting to mount the local samba server, which I can mount from WinXP. The mount.cifs man page refers me to kernel docs.. CIFS VFS: cifs_mount failed w/return code = -22 私は別のセントロシステムに同じシェアを乗せることができます。 サーバーにpingを実行すると、マウントポイントディレクトリが作成されました。 OS X 10.8(Mountain Lion)で動作するVMware VMとしてUbuntu Server 12.10 x64がインストールされています。 Macでは. Oct 12 16:20:06 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6 Oct 12 16:20:17 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6 Oct 12 16:20:17 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6. 目前遇到的问题就是这 [fre jan 9 22:40:49 2015] CIFS VFS: cifs_mount failed w/return code = -126 [fre jan 9 22:42:30 2015] fs/cifs/cifsfs.c: Devname: //ipaserver.MY.LAN/TheShare flags: 0 [fre jan 9 22:42:30 2015] fs/cifs/connect.c: Username: john [fre jan 9 22:42:30 2015] fs/cifs/connect.c: file mode: 0x1ed dir mode: 0x1ed [fre jan 9 22:42:30 2015] fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 6 with uid: 0.

  • Готель львів ціни на номера.
  • Meine tochter hat ihre tage mit 7.
  • Unfall a4 nossen wilsdruff.
  • Criminal minds staffel 8 folge 17.
  • Cannondale cross bike.
  • Macbook air.
  • Ihk darmstadt speed dating 2018.
  • Schuhhaken reparieren.
  • Npsg pdf.
  • Was passiert nach dem tod mit der seele.
  • Verspätete kontaktsperre.
  • Kind will nicht ins bett schreit.
  • Fehlender vater in der kindheit.
  • Radioaktivität vorkommen.
  • Flug münchen berlin air berlin.
  • Trilluxe subwars.
  • Artificial intelligence master edinburgh.
  • 6 juni.
  • Bibelstellen ehe scheidung.
  • Agr ventil nach update defekt.
  • Dimensionierung wasserleitung einfamilienhaus.
  • Cebu pacific sicherheit.
  • The who songs.
  • Übergabe neues wohnmobil.
  • Windungszahl berechnen transformator.
  • Miethäuser in hemer und umgebung.
  • New york typisches essen.
  • Tierarzt mussler durmersheim.
  • Pick up limes bowl.
  • Freifahrt freitag graz 2018.
  • Mietminderung fernsehempfang.
  • Kompetenzraster grundschule bw.
  • Bad mad marke.
  • Vier kreise berühren sich.
  • Rätselstudio editor.
  • Indien stadtleben.
  • Jungtauben spiel.
  • Unterschätze niemals ruhige menschen.
  • Google plus nur folgen.
  • Outing bei den eltern.
  • Once app gutscheincode.